Ballistic Helmet with Face Shield (EMPS100)
|
|
|
|
Overview
A multi layer, light weight, high performance helmet that protects the users head against impact and ballistic hazards for the use of ground troops, police forces and special units.
The helmet shell is of a multi-layered construction, the layers are a combination of aramid and ballistic polyethylene. The helmet includes a harness assembly combined of head harness made of foam cushioned leather headband, chinstrap and a base for attachment of optional face guard.
Helmet Construction and Components
The shape of the helmet is US PASGT. in accordance with MIL-H-44099A
Shell thickness will be 7.3 ± 0.8 (measuring above the edge profile)
The material of the shell will be of a hybrid of aramid and ballistic polyethylene.
The shell edge will be cut as an integral part of the pressing process
The edge profile will be adhered so that it will be joined on the middle of the backside.
The adhesion of the edge profile should be good all along and the proper glue should be used after preparing the shell edge and the profile with the proper method.
Weight of the complete helmet with all accessories will not be more than 1250g ±20g for a Level II, Size Medium; 1350g ±20g for a Level IIIA, Size Medium.
Protection
Ballistic Performance: Tested in compliance with the American National Institute of Justice standard NIJ 0106.01.
Helmets are tested for penetration and back face deformation at Level IIIA using 9mm and .44 Magnum ammunition.
Tested with v50 ballistic test according to MIL-STD-662E, min. 2000 ft/sec. (Level IIIA)
Ballistic protection to 9mm 124G FMJ according to NIJ-STD-0106.01, 1175 ± 50ft/sec (Level IIIA)
Face Guard
A ballistic face guard at a weight of no more than 1500gr including all accessories with the ballistic performance; to stop a 9 mm FMJ bullet, weight 8 gr., Velocity of 332 Meters per second. The face guard when needed shall be fixed in place by a simple method of screws one on each side, designed to be closed shut by the user without requiring any tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|